QSP DB-28 Set of 4 portable alignment stand with built in Turnplates
- Product SKU: QSP-DB-28
Important Shipping Information:-
• Orders received on Fridays after 11am EST will be processed the next business day
• All orders shipped to a RESIDENTIAL ADDRESS will be subject to Additional charges from all carriers at this time.
• What is LIMITED ACCESS - Commercial / Non-Commercial / Farms Click Here to Read More
Financing From Low As $68 per Month
QSP DB-28 Set of 4 portable alignment stand with built in Turnplates
MODEL : DB-28
New design in wheel alignment has the turnplates and slip plates built right into the stands. Set of 4-28" tall stands with wheel and handle kit Included on each stand for easy positioning.These stands are made with 1/4 steel tops and are rated at 2500 lbs. per stand.
Alignment Stand Leveling Procedure
- Alignment stands are mobile so that various wheel bases and track width vehicles can be
- accommodated. The alignment stand feet are also adjustable to accommodate variations in garage floor
- elevations. The goal of this procedure is to have all alignment stands level and at the same elevation.
- Refer to your alignment system’s requirement for the level tolerance of your working surface. This
- will probably be in the range of 1/16” to 1/8” for all alignment stand turnplate tops to be level to each
- other. All leveling and elevation adjustments are made by adjusting the threaded feet on the alignment
- stands.
- Choose one of the front stands either right hand or left hand to as your “home” position. All other
- stands will use this “home” alignment stand to reference their location. Once it is determined which
- stand is home, it is a good idea to mark the location of the home stand on the floor so that it can be
- quickly replaced for future wheel alignments procedures.
- The next steps are best achieved by using a laser level similar to a Bosch GLL 2-20.
- Lock the home position turnplate with the lock pins attached to the alignment stand. By adjusting
- the threaded feet on the bottom of the alignment stand, level the stand using a bulls eye bubble
- level on the turnplate or similar device so that the turnplate is level side to side and front to rear.
- Locate the other three alignment stands for the wheel base and track width of the vehicle to be
- aligned. Be sure that all of the turnplates are in the locked position by using the attached lock pins.
- Place the laser level on the “home” alignment stand turnplate. Using a tape measure, a bulls eye
- bubble lever, and the laser level make sure that all of the alignment stand turnplates are level and at
- the same elevation within your alignment system’s tolerance.
View our website www.repquip.com for other New and Used Equipment we sell.
QSP DB-28 Set of 4 portable alignment stand with built in Turnplates
MODEL : DB-28
New design in wheel alignment has the turnplates and slip plates built right into the stands. Set of 4-28" tall stands with wheel and handle kit Included on each stand for easy positioning.These stands are made with 1/4 steel tops and are rated at 2500 lbs. per stand.
Alignment Stand Leveling Procedure
- Alignment stands are mobile so that various wheel bases and track width vehicles can be
- accommodated. The alignment stand feet are also adjustable to accommodate variations in garage floor
- elevations. The goal of this procedure is to have all alignment stands level and at the same elevation.
- Refer to your alignment system’s requirement for the level tolerance of your working surface. This
- will probably be in the range of 1/16” to 1/8” for all alignment stand turnplate tops to be level to each
- other. All leveling and elevation adjustments are made by adjusting the threaded feet on the alignment
- stands.
- Choose one of the front stands either right hand or left hand to as your “home” position. All other
- stands will use this “home” alignment stand to reference their location. Once it is determined which
- stand is home, it is a good idea to mark the location of the home stand on the floor so that it can be
- quickly replaced for future wheel alignments procedures.
- The next steps are best achieved by using a laser level similar to a Bosch GLL 2-20.
- Lock the home position turnplate with the lock pins attached to the alignment stand. By adjusting
- the threaded feet on the bottom of the alignment stand, level the stand using a bulls eye bubble
- level on the turnplate or similar device so that the turnplate is level side to side and front to rear.
- Locate the other three alignment stands for the wheel base and track width of the vehicle to be
- aligned. Be sure that all of the turnplates are in the locked position by using the attached lock pins.
- Place the laser level on the “home” alignment stand turnplate. Using a tape measure, a bulls eye
- bubble lever, and the laser level make sure that all of the alignment stand turnplates are level and at
- the same elevation within your alignment system’s tolerance.
- Set of 4-28" tall stands
- wheel and handle kit Included
- Rated at 2500 lbs. per stand
This is a Plus Shipping item which only can be shipped to destinations within the 48 contiguous United States. Alaska, Hawaii, and any/all US territories and international orders are excluded.
Price will be calculated at check-out.
UPS Shipping rates are calculated based on actual and dimensional weights. To find your rate, add the item to your cart and then enter your zip code into the right hand side of the shopping cart. If your total UPS order is over 120 lbs, the system will not calculate charges.
*Note: If you are having trouble checking out, please call us at (855) 320 7276.
OR
If you have a special shipping request you need arranged, please email
or call us.
Please Review our Terms of Service, Shipping Policy, Return & Refund, Policy Pages.
